La Crosse Technology Advanced Weather Station

Factory Restart Troubleshooting Tips! Dashes for Outdoor temp 1) Hold HEAT/DEW button for 3 seconds to search for outdoor sensor. Reception icon will flash while searching/solid when received signal. 2) Weak battery power - check low battery indicator on station. You may change batteries in your sensor, then immediately hold HEAT/DEW to search for signal again! Weak/Low Power Low battery next to Indoor Temp = weather station back up batteries are weak/low Continue using power cord, and remove old batteries. Recommend using Brand Name, Standard Alkaline batteries (Exp Date should be 7 years ahead of current year) No action required after Factory Restart: Remove Residual electrical current DISCONNECT: Remove all power (batteries and AC power cord) from weather station and sensor (bring near station) Press one of the buttons on the weather station at least 20 times to clear all memory Leave both units without power for 15 minutes Reinstall with Fresh, New Batteries Insert fresh batteries into the outdoor sensor. Insert the AC power cord into the wall outlet then into the weather station. Wait 15 minutes for proper connection between sensor and display before remounting your sensor. (We recommend mounting sensor on Northside of home, protected from direct sunlight and precipitation, but well-ventilated) Shipping : Please Allow The Handling Time In The Listing. I Typically Do Not Ship On The Weekends Including Friday. Feedback : If You Have Any Type Of Issue Please Reach Out Before Leaving Feedback. I Will Do Everything In My Power To Correct Any Issues That May Occur. I Try To Be As Fair As Possible And Provide The Type Of Service I Myself Would Expect. Questions : Have Any Questions Feel Free To Reach Out And I Will Respond As Quickly As I Can.